CLEANVOX™
CLEANVOX® TEL250T is a washable and decontaminable cleanroom telephone specifically designed for use in clean rooms and sterile environments. Its front panel is manufactured from AUTOTEX® AM with MICROBAN® antimicrobial protection and features a smooth surface, free from openings and irregularities, allowing easy cleaning and decontamination with detergents and bactericidal products.
CLEANVOX® provides high-quality Full-Duplex hands-free communication. In environments with very high ambient noise levels (> 90 dB), the unit can be switched to Push-to-Talk (PTT) mode, with dedicated Tx/Rx LEDs indicating transmission and reception status.
The OCEAN® OCS250T version allows the creation of simple independent intercom networks, completely separate from telephone and data networks.
TEL250T
Recessed mounting
CLEANVOX® TEL250T is supplied with a recessed frame that allows easy fixing in most of the structures used in sterile rooms.
CLEANVOX® is suitable for installation in clean rooms classified according to ISO 14644-1, BS 5295, US FED STD 209E.
- Front panel AUTOTEX® AM
- Antimicrobial MICROBAN®
- Temperature -20°C +60°C
- Keypad 19 buttons
- Ringtone 85db at 1 meter
- LED «on line» Red
- Booster amplifier for places with high ambient noise (requires 12Vdc power supply)
- Local self-diagnosis with verification of microphone and speaker operation
- TelDia® remote interrogation software
- TEL250T analog
- TEL250T-ip VoIP (SIP)
TEL250TP
Wall mounting
CLEANVOX® TEL250TP is supplied with a stainless steel frame that allows easy fixing to the wall. It needs to be finished with silicone to guarantee the desired level of protection. CLEANVOX® is suitable for installation in clean rooms classified according to ISO 14644-1, BS 5295, US FED STD 209E.
- Front panel AUTOTEX® AM
- Antimicrobical MICROBAN®
- Temperature -20°C +60°C
- Keypad 19 buttons
- Ringtone 85db at 1 meter
- LED «on line» Red
- Booster amplifier for places with high ambient noise (requires 12Vdc power supply)
- Local self-diagnosis with verification of microphone and speaker operation
- TelDia® remote interrogation software
- TEL250TP analog
- TEL250TP-ip VoIP (SIP)
OCS250T OCEAN®
Intercom System
CLEANVOX® OCS250T is an intercom system for the OMNIBUS line, completely independent from the telephone network (PBX, PSTN, VoIP). It is supplied with a recessed frame that allows easy fixing in most of the structures used in the sterile rooms. However, a stainless-steel wall frame is available. OCS250T is suitable for installation in clean rooms classified according to ISO 14644-1, BS 5295, US FED STD 209E.
- Front panel AUTOTEX® AM
- Antimicrobial MICROBAN®
- Temperature -20°C +60°C
- Keypad 16 buttons
- Ringtone 85db at 1 meter
- LED «on line» Red
- Speaker 90dB at 1 meter
- Amplifier 15 WRMS 16 Ω
- Transmission 0 dB/600 Ω
- Up to 99 devices
- Direct call with 2-digit code
- General call to all devices
- OCS250T 24Vcc
OCEAN® is a professional industrial intercom system based on a simple two-wire copper OMNIBUS network, completely independent of telephone, PBX and data networks.
The system requires no centralized switching unit. All devices are simply connected in parallel on a common two-wire telephone cable (2 × 0.6 mm), providing an extremely simple and reliable system architecture. Up to 99 devices can be connected to the same system.
Each device can call any other station directly by dialling its dedicated two-digit number on the keypad. A dedicated button also allows the operator to broadcast a voice message simultaneously through the loudspeakers of all connected stations (PAGING).
Indoor and outdoor OCEAN® stations can be combined within the same system, allowing the network to cover different areas and environmental conditions.
Operation in Push-to-Talk (PTT) mode ensures excellent communication performance even in environments with very high ambient noise levels.